PRODUCTS

COMMON MODE CHOKESCommon mode chokes are useful for the prevention of electromagnetic interference (EMI) and radio frequency interface (RFI) from power supply lines and for preventing electronic equipment from malfunctioning.What is the advantage of using common mode chokes? These parts suppress unwanted signal interference, or noise.Transmart manufactures Common Mode Chokes in Nanocrystalline Cores, which are in-house produced.APPLICATIONS1.EMI filters, loading coils and Q filters2.Switching mode power suppliesPlease visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartcore.comFacebook: https://www.facebook.com/Transmart.Ind.LtdYoutube: https://www.youtube.com/@TransmartIndustrialLtdLinkedIn: https://www.linkedin.com/company/transmart-industrial-limited/Instagram: https://www.instagram.com/transmart307/Pinterest: https://www.pinterest.com/transmart307/X(Twitter): https://x.com/TRANSMART307Tiktok: ht...

Toroidal TransformersTransformers based on toroidal cores. Transmart has full control from core to finished transformer manufacturing. Toroidal transformers are considerably smaller and lighter than similar conventionally EI transformers. The construction of toroidal transformer for audio amplifier is ideal in installations which require low magnetic radiation and very low weight, flexible dimensions and optimum conditions between dimensions are preferable.Applications Of Toroidal Power TransformerLighting system / Power converter, chargerAudio amplifier, public broadcasting and Security power systemUPS, energy storage, inverterAutomatic door, elevator controlPV / Wind power controlPlease visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartcore.comFacebook: https://www.facebook.com/Transmart.Ind.LtdYoutube: https://www.youtube.com/@TransmartIndustrialLtdLinkedIn: https://www.linkedin.com/company/tra...

O CORE: An ideal core for audio transformer require extremely low magnetic leakage, low noise and high efficiencyO core also known as O-core or OA-core.O core is a tape wound core in electrical steel, with circular cross section.The key point of manufacturing an O core is material slitting, which is called curve slitting, material is slit into a continuous strip from small to big, and then from big to small in width. After the cores are wound, they are put into vacuum furnace for stress relief annealing, so that the cores with the best electrical performance.Standard core sizes from 10VA to 2000VA.FeaturesCircular cross sectionClosed magnetic pathLow magnetic leakageLow noiseHigh efficiencyAPPLICATIONS1.High-end transformers in Audio system2.Elevator transformer3.Machinery transformerOA cores can be supplied epoxy coated, cut or uncut.Please visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartcore.c...

Current Transformer Nanocrystalline CoresThe properties of nanocrystalline alloys present a unique combination of low losses and high permeability achieved by NiFe alloys and cobalt amorphous alloys, but with a saturation much higher than either of these materials can offer. Nanocrystalline cores offer better performance than NiFe cores, both in permeability throughout the B/H curve and also higher saturation induction. With respect to silicon steels the saturation is lower but due to the chemistry and thickness, of the ribbon, the power loss is also much better.Please visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartcore.comFacebook: https://www.facebook.com/Transmart.Ind.LtdYoutube: https://www.youtube.com/@TransmartIndustrialLtdLinkedIn: https://www.linkedin.com/company/transmart-industrial-limited/Instagram: https://www.instagram.com/transmart307/Pinterest: https://www.pinterest.com/transmart...

TRANSMART Customized Nanocrystalline Common Mode Choke Core manufacturers From ChinaVarious types magnetic materials available: Silion Steels,  Nanocrystalline ribbon, Amorphous Ribbon, MumetalPlease visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartcore.comFacebook: https://www.facebook.com/Transmart.Ind.LtdYoutube: https://www.youtube.com/@TransmartIndustrialLtdLinkedIn: https://www.linkedin.com/company/transmart-industrial-limited/Instagram: https://www.instagram.com/transmart307/Pinterest: https://www.pinterest.com/transmart307/X(Twitter): https://x.com/TRANSMART307Tiktok: https://www.tiktok.com/@tst180307Contact us today to learn more. Email: sales@transmart.net / richard@transmart.netWhatsapp: +86 136 2868 9494

Soft Magnetic Materials Nanocrystalline RibbonsNanocrystalline Ribbon is a new type of Fe-based soft magnetic materials. Traditionally, metal crystalline materials with larger crystal grains were considered to have better magnetic characteristics. However, Nanocrystalline is invented with extremely small crystal grains ( at around 10nm, that’s why it is called Nano materials), considerably improve the magnetic characteristics.FEATURESFeatures Of  Nanocrystalline Ribbon: High saturation flux density, high permeability, low core loss, low magnetostriction, good temperature stability. The materials help to make various magnetic components for electronic devices lighter and increasingly compact, energy saving and low noise.PackagingPlastic roller inside to guarantee the ribbon in good position and shape. Vacuum packaged applicable.Please visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartcore.comFacebo...

Chamfered toroidal core also called edge-grinded toroidal core.Tape wound toroidal cores are with right-angled edges, which are very sharp and dangerous.The sharp edges will cut through insulation tapes and damage copper wires wound on the core.Transmart uses CNC machines to chamfer toroidal cores according to customer requests, radius from 1mm to 5mm, smooth edges finishing. Advantages of chamfered coresSmooth round edgesProtect insulation tapeProtect copper wiresShorter coil length ( less copper used, save money)Please visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartcore.comFacebook: https://www.facebook.com/Transmart.Ind.LtdYoutube: https://www.youtube.com/@TransmartIndustrialLtdLinkedIn: https://www.linkedin.com/company/transmart-industrial-limited/Instagram: https://www.instagram.com/transmart307/Pinterest: https://www.pinterest.com/transmart307/X(Twitter): https://x.com/TRANSMART307Tiktok:...

C-CORES AND E-CORESTransmart Industrial manufactures a wide range of strip wound C-cores and E-cores, in standard ranges : Chinese, British, European and America.  All of which can be supplies to various electrical specifications. Customized sizes are welcome as Transmart is flexible to satisfy customer various demands.SERVICEC-coes and E-cores can be supplied with Stainless steel bands made specifically for each core.Please visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartcore.comFacebook: https://www.facebook.com/Transmart.Ind.LtdYoutube: https://www.youtube.com/@TransmartIndustrialLtdLinkedIn: https://www.linkedin.com/company/transmart-industrial-limited/Instagram: https://www.instagram.com/transmart307/Pinterest: https://www.pinterest.com/transmart307/X(Twitter): https://x.com/TRANSMART307Tiktok: https://www.tiktok.com/@tst180307Contact us today to learn more. Email: sales@transmart.net / ric...

Transmart Industrial Limited has been manufacturing wound cores with Domain-Refined Grain oriented Silicon Steel Grade 23JGSD085 for more than 10 years. Material characteristics:-        Domain-refined materials ( you can see clear lines on surface of the materials)-        Ultra-low iron loss: typical values 0.78W/Kg at 1.7 Tesla 50Hz-        High magnetic flux density: 1.88T at 800 A/m-        Heat resistant: materials can withstand annealing temperature up to 820℃, without affecting magnetic properties. Best applications: High quality tape wound cores for -        Current transformer cores-        Hall effect current sensor cores-        Current transducer cores Transmart is contributing its strength for the carbon peak in 2030 and carton neutral in 2060, by producing high quality magnetic cores with lower iron losses. Please contact us for your high quality cores, you will enjoy the benefits of energy savings! Please visit our website for further information about our company. H...

Mumetal is a NiFe alloy with very high permeability, so it is also called permalloyHigh efficiency / Low temperature riseSmaller component size / Highter power throughputHigh temperature operation APPLICATIONSCurrent Transformers / lPower TransformersPulse Transformers / Current Sensors Earth Leakage Circuit Breakers / Measuring Industry FeatureHigh permeabilityLow magnetization in higher inductionHigh saturation flux density 0.6T-1.5TCompleted with vamished form, impregnated form and with plastic/metal casePlease visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartcore.comFacebook: https://www.facebook.com/Transmart.Ind.LtdYoutube: https://www.youtube.com/@TransmartIndustrialLtdLinkedIn: https://www.linkedin.com/company/transmart-industrial-limited/Instagram: https://www.instagram.com/transmart307/Pinterest: https://www.pinterest.com/transmart307/X(Twitter): https://x.com/TRANSMART307Tiktok: https:...

Fe-based amorphous core filter inductanceFe-based amorphous filter inductor core having excellent frequency characteristics and the DC superposition characteristic and a low core loss, and its permeability can be controlledVary within a wide range (u a 120-1200), may be resistant to different ranges of ampere-turns of bias (bias magnetic field), it is suitable for various high-frequency, alternating and direct superimpositionInductive application device, which is cost-effective than molybdenum and iron-nickel Sendust magnetic core.Applications· Car Audio choke· PFC correction inductor· A differential mode filter and a smoothing filter output· DC / DC converter filter coil· Conventional filter coil and the filter coil adapter FeaturesHigh saturation magnetic induction, low coercivity, low loss;Excellent anti-DC bias characteristic;High permeability from 120 to 1200, number of turns less.Please visit our website for further information about our company. Homepage: www.transmart.netFOL...

Nanocrystalline cut cores are widely used in open-type current transformers, sensors, and power inductors and other fields, as compared to conventional silicon steel core, which after cutting permeability silicon steel is nearly 10 times, the loss of silicon 1/3, the price is 50% permalloy, silicon steel is the ideal material substitution and permalloy.Applications· Open-type current transformer·sensor· Power inductors and transformers FeaturesAfter the cut-permeability up to 6000 or more - to increase an accuracy class transformers conventional open type· Cutting loss (16KHz / 37mT) 1/2 is amorphous, silicon steel 1/6 - reduce the heat and improve the service life of the finished inductor* Excellent linearity - 20% better than the same specifications silicon steel Linearity· Excellent Excellent value for money - the price of permalloy 1/2Please visit our website for further information about our company. Homepage: www.transmart.netFOLLOW ME:Check my website: https://www.transmartco...